It is really hard to deal with the issues of electrical appliances on a daily basis. I mean if you are old school then getting used to these latest appliances might be challenging for you. However, if you are confident enough that you can solve almost every related issue then it is a good thing. But for such a thing to happen you need to make sure that you have adequate knowledge as well. Currently, many people are facing issues with their Kitchenaid dishwasher. So in this article I will be guiding you regarding the Kitchenaid dishwasher diagnostic mode. You will feel a lot more confident after reading this article.
KitchenAid Dishwasher Diagnostic Mode Reset Methods
If you are facing any issue with your Kitchenaid dishwasher then instead of investing into expensive solutions make sure to first try out the reset methods. For this, there are three approaches that you can follow. I have mentioned them down below.
1. Basic/Simple Reset
To perform a simple reset, follow the following steps.
- Make sure to first turn OFF the circuit breaker
- Then unplug the dishwasher
- Wait for 7-10 minutes
- After this duration, turn ON the circuit breaker
- Re-plug the dishwasher and see whether the issue still exists or not
2. Control Panel Reset
To perform a control panel reset, follow the following steps.
- Search for “Dry” and “High Temperature” buttons
- Press them for 5 – 10 times
- You need to make sure the dishwasher door is closed properly
3. Cycle Reset
To perform a cycle reset, follow the following steps.
- Look for “Drain” or “Cancel” button
- Have it pressed for a few seconds
- When the current cycle stops, start a new one
Enabling Diagnostic Mode on KitchenAid Dishwasher
Diagnostic mode is really important especially when you have no clue regarding the problem’s nature. For instance, consider a situation where you come across an error, you have no idea what to do next. The ideal way to deal with this situation would be to enable the diagnostic mode. If you have no idea about how to enable this particular mode then simply read the below mentioned steps.
General Enabling
- Press “Heated Dry” + “Normal” buttons (Twice)
- Press “High Temperature Wash” (6 Times) + “Start” buttons (Once)
- Press the following keys (Thrice): 1, 2 and 3
- Press “Rinse Only” and “SANI” buttons (Twice)
- Press “High Temperature Scrub” + “Air Dry” buttons (Twice)
- Press “High Temperature Wash” + “Energy Saver Dry” buttons (Twice)
KitchenAid W10142800B, or 8572216 or W10130990C Dishwasher Models
You can enable the KitchenAid dishwashers of models W10142800B, 8572216 and W10130990C by following the below-mentioned steps.
- Keep your dishwasher plugged in but have its power OFF (standby)
- Look for the buttons; “Heated Dry” and “Normal”
- Press these two buttons in sequence (Twice)
OR
- Unplug the dishwasher
- Unplug its thermistor twice
This whole process will take 5 – 6 seconds so make sure you perform the steps quickly.
KitchenAid KUDD03DT Dishwasher Model
If you own a KitchenAid dishwasher of model KUDD03DT then you would have to perform the following steps so that it can enter the diagnostic mode.
- Keep your dishwasher on standby mode
- Press the “High Temperature Wash” button for 6 times
- Search for the “Start” button and press it one time
KitchenAid W10195615A Dishwasher Model
To enter the diagnostic mode on KitchenAid dishwasher W10195615A, consider the below mentioned steps.
- Make sure you have your KitchenAid dishwasher on standby mode
- Press the following sequence of keys three times: 1, 2 and 3
- Give a pause of 1 second between the presses
- The dishwasher door should be closed otherwise the test will not run
KitchenAid KIDS01EK Dishwasher Model
You can enter the diagnostic mode on KitchenAid KIDS01EK dishwasher by taking the help from below mentioned steps.
- Keep your dishwasher on standby mode
- Press “Rinse Only” and “SANI Rinse” buttons two times to enter the diagnostic mode
- Wait for the error to be displayed
KitchenAid 8537797 Dishwasher Model
For entering the diagnostic mode on KitchenAid 8537793 dishwasher, follow the below steps in order to avoid future inconvenience.
- Have your dishwasher on standby mode
- Now press the “High Temperature Scrub” and “Air Dry” buttons at the same time
- Press these two buttons again
OR
- Press “SANI Rinse” + “Air Dry” buttons
OR
- Press “Energy Saver Dry” + “Air Dry” buttons
OR
- Press “No Heat Dry” + “Air Dry” buttons
Alternative Buttons to Use
- You can press “High Temperature Scour” or “Power Scour” instead of “High Temperature Scrub” button
- You can press “Energy Saver Dry” or “No Heat” instead of “Air Dry” button
KitchenAid KUDR245EWH5 Dishwasher Model
Having a KitchenAid KUDR245EWH5 dishwasher will let you enter the diagnostic mode by following the below steps.
- Turn ON the standby mode of your dishwasher
- Press “High Temperature Wash” and “Energy Saver Dry” buttons
- Again press the two keys in sequence
OR
- Press “High Temperature Wash” button three times
After you have entered the diagnostic mode on your KitchenAid dishwasher, make sure that you come across different error displays (if any). Once the errors have been interpreted, you can easily resolve the problem.
IMPORTANT
- In case of an error, the cancel LED light will flash
- Note down the error code before pressing any key after the LED light flashes
- Make sure the dishwasher door is closed
- Run a test cycle with clean water
- As an expert, I would definitely suggest you follow these instructions.
Also Check More Dishwasher:
Bosch Dishwasher Won’t Start just Beeps [5 Fixation 2024]
Whirlpool Dishwasher Diagnostic Mode [4 Fixation 2024]
Bosch Dishwasher No Lights On Control Panel [5 Main Reasons]
Bosch Dishwasher Starts then Stops [4 Main Reasons 2024]
Bosch Dishwasher Cant Change Cycle [5 Fixations 2024]
Bosch Silence Plus 44 dba Troubleshooting (9 Solution 2024)
Why is my Kitchen Aid Dishwasher Beeping? [10 Fixation 2024]
Frequently Asked Questions:
Q – How long is the KitchenAid dishwasher diagnostic cycle?
A – The diagnostic cycle on a KitchenAid dishwasher can take up to 10-30 minutes to complete.
Q – Where is the reset button on a KitchenAid?
A – If you own a model that has a temperature setting then you will find the reset button on the control panel in the refrigerator compartment.
Q – What is the most common problem with the KitchenAid dishwasher?
A – Lack of water flow or a clogged drain are two most common problems faced by the KitchenAid dishwasher users. These problems are caused due to a faulty water inlet valve, blockages in the line or a broken pump motor.
The End
A KitchenAid dishwasher diagnostic mode’s main function is to identify different faults. This approach would collect enough valuable information to troubleshoot the error. I think it’s a quite useful way to find out about unknown error codes. Moreover, it saves you the trouble of investing your efforts and time in finding out what the actual error is. So make sure you use the diagnostic mode in the best possible way because that’s the only way to have the issues resolved. On the other hand, if you find this approach confusing or time taking then simply contact an expert and get the job done in the right way.