It is a common thought to experience for the people that if they buy any appliance from a well-known brand then they will face no issue whatsoever. But things don’t always work this way. Sometimes the appliances bought from the latest brand could be causing you trouble. In such situations, all you need to do is stay humble and try to fix the problems with courage.
You also need sufficient knowledge to be able to solve the problem. Well, if you are looking for Bosch Silence Plus troubleshooting methods then this article is definitely for you! Keep reading this article till the end in order to find out more.
Bosch Silence Plus 44 dba Troubleshooting – Potential Problems & Solutions
Before jumping on to the fixes it is important to get familiarized with the problems. After you have fully understood the problem, you can easily apply the relevant fix for that problem. In this section I will be discussing the most commonly faced problems along with their solutions so stay with me till the end of this article.
1. Automatic Filling of Water
One of the most commonly faced problems of Bosch dishwasher users is that their dishwasher starts filling up with water automatically. There is no doubt that this is an actual panic situation for you and others as well. For instance, your kitchen might experience a mini-flood situation whenever your dishwasher starts filling up with water. Moreover, it could add up in the water-bill expenses as well. The mentioned problem might occur due to a jammed entry valve.
Now you might be wondering what could be the possible reasons for an entry valve to become jammed. Well, it mostly happens due to two reasons; calcium build-up and presence of faulty filter-mesh.
Solution
Don’t think that cleaning the valve will solve the issue in fact you have to get the whole valve replaced. Consider purchasing Endurance Pro 425458 Dishwasher Water Inlet Valve because it is compatible with almost every Bosch dishwasher model.
2. Unit not Starting
It is common to think that whenever your dishwasher stops working then it is because of any electrical component that has become faulty. In this case you can consider the following reasons which might contribute to the problem.
Delay Start Activated
If you have the “Delay Start” option activated on your dishwasher then of course you will have to wait for the delay time to finish. You cannot turn ON your unit during this process. In case of an immediate start it is better to perform a reset.
Control Lock Activated
Control lock is present so that your children cannot interfere with the dishwasher. If this lock is enabled then you cannot turn ON your unit. You will have to deactivate this lock in order to proceed.
Opened Door
You need to make sure that the dishwasher door is properly closed and latched otherwise the unit will refuse to start.
3. Unit not Draining
When it comes to dishwashers, draining becomes top priority. I mean nobody wants to have their utensils soaked in dirty water. If you are facing this similar issue then make sure to carry out the below mentioned solution.
Solution
- Remove the filters carefully
- Drain out the water manually
- Remove the nuts and component and then access the propeller
- Check the propeller for possible obstructions
- Moreover, check the rubber check and make sure to remove possible debris from it
After doing this all, you will have your unit draining properly.
4. Unit Filling with Dirty Water
An unusual scenario would be when your unit starts filling up with dirty water. The most common reason for this would be the presence of a faulty check valve. Check valve is important because it keeps the dirty and clean water separated. Now imagine what would happen if this valve gets faulty.
Solution
It is obvious that the solution of this problem would be to replace the broken check valve with a new one. Consider buying Bosch 00165262 if you are looking for a good replacement.
How to Replace the Check Valve?
- Get access to the check valve by removing the lowest washer rack
- Noe remove the bottom spray arm and filter screen basket
- Pull the lid out
- Remove the damaged check valve and replace it with a new one
5. Unit not Drying
If your dishwasher is washing the dishes properly but not drying them then it is of no use. The components which are causing your dishwasher to not dry the dishes are vent, heating mechanism and vent motor.
Solution
Check the vent first, if it is not opening properly then it means there is something wrong with it. The only solution is to get it replaced.
Secondly, inspect the motor using a multimeter. You can also check the motor fan by manually moving it with your hand in order to make sure there are no possible obstructions.
Lastly, if the heating mechanism has become faulty then you need to make a quick replacement no matter what.
6. Unit not Filling with Water
Your dishwasher not filling with water at all is really concerning. The whole working of your dishwasher depends on water and if it isn’t filling up with water then of course it is as good as dead. This type of situation occurs when the input valve is faulty or damaged. To solve this issue, you need to replace the input valve with a new one.
How to Replace the Input Valve?
- Reach the bottom access panels
- Remove the harness and cut off the water supply
- First detach the elbow brass and remove the old valve
- Replace the old valve with a new one
7. Unresponsive Buttons
The buttons on your dishwasher might become unresponsive often. There is nothing to worry about as this is not the fault of the dishwasher. Perform a simple reset and have this issue resolved within no time.
8. Unit Producing Noise
You don’t want to work in a noisy environment, right? So basically, if your dishwasher starts producing unnecessary sounds while working then you will get irritated within no time. There are multiple reasons for this problem which are mentioned below.
- Water temperature too high
- Broken input valve
- Presence of a damaged motor axle
- Clogged filter screen
- Lack of thermal insulation
After fixing these problems you would be able to get rid of the unnecessary noises.
Also Check More Dishwasher:
Why is my Kitchen Aid Dishwasher Beeping? [10 Fixation 2024]
Bosch Dishwasher Cycles Explained [8 Types Cycle 2024]
GE Dishwasher Start Button Not Working [10 Fixations 2024]
Whirlpool Dishwasher Fills with Water then Stops 4 Fixation
9. Leakage
The unit’s pump seal will be damaged with an overflowing dishwasher. Pump seals can easily get damaged once the sealant dries out. So your first step should be to determine the origin of the leakage.
Solution
Replace the impeller and seal kit with a new one or you can also invest in buying a whole new motor system.
The End
There is no doubt that Bosch Silence Plus 44 DBA is the best model till now. But this doesn’t mean that with this model in your hand you wouldn’t face any issue or problem. Anyhow, I have provided you with information regarding all the troubleshooting methods so make sure to consider each method carefully so you don’t have to face future inconveniences.