Bosch Dishwasher No Lights On Control Panel [5 Main Reasons]

So imagine a situation where you have a pile full of dirty plates and what you see is that your dishwasher is dead and there are no lights on the control panel. It would be hard to experience such a situation where on one side you have a pile of dirty plates and on the other side you have a dead dishwasher.

If you are a Bosch dishwasher user and you see no lights on the control panel then it is understandable that it must be a panic situation for you. But don’t worry as I have the solution to your problem. What you need to do is keep following this article till the end if you want to find out more.

Bosch Dishwasher No Lights on Control Panel – Reasons

Following are the reasons why you see no lights on the control panel of your Bosch dishwasher.

  • Power Supply Problem
  • Loose Power Cord
  • Power but No Light
  • Damaged Control Board
  • Activated Child Lock

Troubleshooting Guide

Now after knowing the reasons it is important to dive into their troubleshooting methods, so without any further ado, let’s get started.

1. Power Supply Problem

You should definitely inspect the power supply as your priority. For this you need to look for the situations which involve power supply. Try multiple reasons and don’t just stick to one.

Solution

For every reason, you need to follow a relevant fix so make sure you go through this section carefully.

  • Resetting the Circuit Breaker

Circuit breaker is responsible for providing power to all the appliances in your home. First of all, you need to reset the circuit breaker. To reset it, make sure to follow the below mentioned steps.

  • Remove the fuse from the box. You can also flip the circuit breaker in OFF position.
  • Wait for 2 – 3 minutes.
  • After this duration, bring back the circuit breaker to ON position.
  • You can also reinstall the fuse.
  • Run a test and check whether the dishwasher is working fine or not.

Following these steps properly will allow you to carry out the whole procedure seamlessly. If you have missed one or two steps then it is possible that you face various issues during the process.

2. Loose Power Cord

Power cord is basically the primary source to obtain power. The working of your dishwasher depends merely on the power cord. Unfortunately, if the power cord becomes loose or faulty then it might be the reason that your dishwasher isn’t working.

If your dishwasher has a power cord then you will most likely face this issue. But make sure that you know this thing that not all dishwashers have a power cord. If the power cord is not present then you will not face this issue.

Solution

After confirming that your dishwasher uses a power cord, make sure to check the outlet as well. If it is faulty then make sure to call an electrician to get the job done. Reset the outlet if the power cord is plugged into a GFI/GFCI outlet. Most importantly, if your dishwasher uses a wall-switch then you should also check its power.

3. Power but No Light

If you have a stable power supply but there are no lights present on your control panel then you should definitely get concerned. To have this issue resolved, make sure to follow the below mentioned steps.

Replace the Control Panel

Sometimes, the unit is not the real culprit but the control panel. If the power has been restored successfully but there are no lights then it is a clear indication of a damaged control panel.

Solution

Check for loose wire connections and rusting. In case you find any corrosion or rust then make sure to get rid of it. Faulty wires need to get replaced as soon as possible. But if these solutions don’t work out for you then you need to get the control panel replaced. Ensure that you choose the right model for the replacement.

4. Damaged Control Board

There isn’t a single possibility that you can ignore when it comes to faulty appliances. You can expect your control panel to be faulty as well as damaged. Don’t just panic, you need to first look for the frayed wires, burnt parts and loose wire connections. You need to also check the connectors and make sure that they are properly tightened. Due to their continuous use, the components might become old.

Solution

If the above mentioned fixes don’t work out for you then I recommend you to buy a new board for smooth working of your dishwasher. The control board should be of the same model as the old one. If this is not the case then you will start experiencing compatibility issues.

5. Enabled Child Lock

Having a child lock enabled on your dishwasher means that it will stay protected from the usage of children. Moreover, it will also avoid outside interference. Along with this, your children will be safe from further damages.

Solution

Make sure to deactivate this lock in order for your dishwasher to work.

  • Find the lock catch
  • Hold the lock catch to the right side
  • Press the lock catch in backward position
  • The child lock will be deactivated successfully

By following these steps, you will easily be able to deactivate the child lock without any inconvenience.

Concluding Thoughts:

All in all, there is nothing to worry about when your dishwasher shows no lights on the control panel. I have mentioned every possible reason why this could happen. All you need to do is check the components for the fault. If you find any component to be faulty then make its replacement as soon as possible. But a faulty control panel will only get replaced and not fixed. Other than this, you can easily go for the fixing solution for other components. I hope my article will help you in navigating through this issue. Make sure to give it a proper read to avoid issues.

Leave a Comment