You might have heard this thing that whenever any appliance stops working just reset it and the issue will be resolved within no time! Weirdly, it is true. But this statement is not true for every issue. There are still some issues which are not resolved by a simple reset. You have to do more than just performing a simple reset. If you are not aware of all these technicalities then no worries because I will be guiding you through this article.
Okay so we are clear on this thing that before trying anything else you have to first consider resetting your washer if it stops working. But do you really know how to perform a reset? If not then keep following me till the end of this article.
Which Issues are Resolved by Reset Methods?
This is an important question and you must know its answer so that you know when to perform a reset and which issues are resolved by it. Following are some of the issues that can be resolved by a simple reset.
- Error Codes
- Defective Lid Lock
- No Agitation
- Washer refusing to Start
- Annoying Noises
- Continuous Spinning
- Unstoppable Vibration
- Power Failure
- Replacement of Control Board
Precautionary Steps to Consider
There are a few precautionary steps that you need to consider before trying out the reset methods. Make sure you follow them.
- The drum should be empty i.e. no water or clothes.
- The washer should be kept on standby mode.
- The lid should be closed properly.
Types of Reset Methods
There are multiple ways to deal with a situation and you always opt for the one that you prefer. Luckily, if we talk about reset methods then you will be surprised to know that you can perform a reset on your Maytag Bravos MCT Washer in 4 different ways. On top of all these things, the best one is that all these reset methods will work for every washer model you own.
- Quick Reset
Quick reset method is the first one to discuss because it is considered the most efficient one among people. To perform a quick reset you need to follow the below mentioned steps.
- Make sure the washer is turned ON.
- Now press the “Power” or “Cancel” button to start your preferred wash cycle.
- After selecting the cycle, press the “Start” button.
If this method doesn’t work out for you due to any reason then try the other available methods.
- Simple Reset
Simple reset, as the name suggests is the simplest reset of all. It is simple to the extent that if I don’t guide you thoroughly regarding this even then you will be able to perform this reset. Unfortunately, you cannot resolve complex issues with this reset, you can resolve only the simple issues.
- Disconnect the power to the main supply.
- Unplug your washer.
- Wait for 4 – 5 minutes.
- Re-establish the connection by connecting the power cord to the main supply.
- Run a test cycle to check whether the washer is working or not.
Didn’t find luck with this method too? Try the next one!
- 12’O Clock Turn
Don’t think that you can perform this reset only at 12’O Clock, just kidding. You can perform this reset anytime you want. The name might not fascinate you but this reset method will resolve most of the underlying issues.
- Make sure your washer is ON.
- Bring the cycle-selector knob in a 12’O Clock position.
- Now turn the knob 3 times in a clockwise direction.
- Do the same with the knob but this time in an anti-clockwise direction.
- Turn the knob in the clockwise direction for the last time.
- If you see any light flashing then turn the knob in clockwise direction 4 times.
- Press “Start”.
That’s it, perform the above mentioned steps and you will be able to carry out this method successfully.
- Calibration Technique
Calibration technique is the most effective one among all. But don’t worry as it is easy to perform.
- Make sure the washer drum is empty.
- Close the lid properly.
- Ensure that the washer is on standby mode.
- Turn the cycle-selector knob one time in the clockwise direction,
- Then turn the cycle-selector knob three times in the anti-clockwise direction.
- Repeat the movements one more time.
- Keep repeating the process until you see the lights blinking.
- As soon as the “Rinse-only” light blinks, stop clicking.
- Press “Start”.
The steps are pretty simple, aren’t they?
How do I Enter the Diagnostic Mode of Maytag Bravos MCT Washer Reset?
Some of the issues will be resolved by the reset methods but what about the ones which are not resolved by performing a simple reset? Well, in that case you need to do a little extra and know more about the error codes. To do this you need to enter the diagnostic mode. You can do this by performing the below-mentioned steps.
- Turn the cycle-selector knob in the clockwise direction once.
- Repeat the above step again after waiting for 0.5 seconds.
- Keep repeating the above-mentioned steps until you see the lights blinking.
If a Maytag Washer Becomes Stuck in the Spin Cycle, How Can It Be Reset?
If you ever experience a situation where your Maytag washer becomes stuck in the spin cycle then you can resolve the issue by resetting the washer. For that, you need to follow a series of steps which I have mentioned below.
- Take the machine out of the electrical outlet.
- To allow the memory to clear, disconnect the washing machine for at least one minute.
- Replug the washing machine into the power outlet once you’ve waited.
- Check the panel for any problem codes when the machine has been powered back on.
Check More Washer Fixation:
Whirlpool Washer Stuck on Sensing
Frequently Asked Questions
Q – How do I clear the error codes on my Maytag Bravos washer?
A – To clear the error codes on Maytag Bravos washer press Start or Pause button. Then press the buttons again for the second time to reset your washer.
Q – Does the Maytag Bravos MCT washer have a filter?
A – Every modern Maytag washer has a filter, which needs to be cleaned every three to six months to avoid clogs and dangerous lint accumulation. The filters in top-loading machines are located in the middle of the agitator tube.
Q – What are common problems with Maytag Washers?
A – Following are the common problems with Maytag Washers.
- Unresponsive Controls.
- Washer Dispenser not working.
- Washer Filling when not in use.
The End
All in all, there are only 4 reset methods when we talk about Maytag Bravos Washer. You won’t find any other method no matter what. It is guaranteed that if you follow the steps mentioned in this article carefully then you can easily perform the reset process. Some issues might require you to do something extra so in that case collect the information about the error by entering the diagnostic mode and then take appropriate actions relevant to the issue.