So are you also one of those people who tend to buy different appliances and then experiment with them just to make sure they are working fine? Well, if not then it might be a good or a bad thing. Many people think that testing an appliance will give a guarantee about its durability. On the other hand, some people think that if an appliance has been tested too much then there are certain future inconveniences that might occur. Now you know which category you belong to.
Recently, I came across the most asked query which was regarding KitchenAid dishwasher beeping. Unfortunately, not many people have posted about it but they sure have experienced this issue. If you are currently facing this issue then believe me I understand your pain. Keep reading this article till the end if you want to find out the solution to your problem.
Why is my Kitchen Aid Dishwasher Beeping? – Potential Reasons
Before jumping on to the fixes, it is advised to first find out the reasons why your KitchenAid dishwasher is beeping and then apply relevant fix to it.
- Unclosed Door
- Insufficient Amount of Detergent
- Excess Dishes
- Blocked Filters
- Lack of Rinse Aid
- Power Supply Issues
- Inadequate Water Level
- Constant Turning OFF of the Dishwasher
- Faulty Sensors
These are the most common reasons why your Dishwasher keeps on making a beeping sound. In the next section of this article I will be guiding you regarding the solution fixes so stay tuned!
Troubleshooting Guide
Now comes the troubleshooting guide, make sure to read this section thoroughly so that you can adopt the most relevant fix for your problem.
1. Unclosed Door
I have personally seen this thing that people often open the dishwasher’s door during its cycles. As soon as this happens, the control board detects the presence of an opened door and starts producing beeping sounds. Know this thing that the dishwasher will not start a new cycle until and unless it hasn’t completed the old one. Now what exactly happens when you open the dishwasher’s door in the middle of its cycle? Well, in this case there is only one possibility which is that the current cycle will be paused and will not resume until you close the door. To start a new cycle you have to perform a reset.
Solution Fix
The solution fixes for this problem is pretty straight forward:
- Avoid opening the dishwasher’s door during its cycles.
- Check the door latch and get it replaced if it has become faulty.
2. Insufficient Amount of Detergent
Most of the time it is not actually the machine’s fault but the user’s fault. It is a common mistake from the user’s end that they forget to add detergent into the dishwasher. Due to this mistake, the dishwasher starts making beeping sounds.
Solution Fix
Make sure to add the detergent before starting the cycle. Keep the detergent ratio balanced and restart your dishwasher.
3. Excess Dishes
Another common reason that contributes to the problem is the presence of excess dishes. How do you expect your dishwasher to work when you have over-burdened it? The beeping continues due to this. I understand that this problem can be frustrating because everyone wants to get rid of dirty dishes and I assume you are also one of them. So what really happens is that the spray arms get blocked when a huge pile of dishes is stacked in the dishwasher.
Solution Fix
There is no rocket science involved in the solution of this problem as it is pretty easy to follow. What you need to do is remove all the extra dishes that have been over-burdening your dishwasher and try to start a new cycle in order to test its normal functioning.
4. Blocked Filters
If your appliance uses filters then you need to be extra cautious regarding it. The filters have a maximum life time of 6 months after that they start facing issues. Presence of blocked or clogged filters is another issue to face.
Solution Fix
If your dishwasher filters have completed this time duration then you can simply have them replaced. However, if the filters are simply clogged then you can unclog them easily by removing the dirt and debris.
5. Lack of Rinse Aid
Lack of rinse aid can become a reason for the constant beeping sound of your dishwasher. It is recommended to check the rinse aid level regularly so that such confusions can be avoided.
Solution Fix
Make sure to refill the rinse aid tank as soon as possible. Leave the dishwasher for some time, restart the dishwasher and check whether the beeping sound exists or not.
6. Power Supply Issues
Sometimes power supply issues can become the cause for the beeping sound of your dishwasher. Recently, if your area has experienced some kind of power outage then it might affect other appliances as well. Unfortunately, your appliance could be one of them.
Solution Fix
Find the start button on the dishwasher and have it pressed for almost 5 minutes. Wait for some time and then turn ON the dishwasher again. Hopefully, this might resolve the beeping sound of your dishwasher.
7. Inadequate Water Level
It is a stated fact that if the water level of your dishwasher hits a certain level then it is expected that you hear a beeping sound. Your dishwasher might experience a reduced water level due to the presence of a malfunctioning inlet valve or a faulty float switch.
Solution Fix
In case of a faulty inlet valve or float switch, you need to make quick replacements without wasting any further time.
9. Constant Turning OFF of the Dishwasher
Sometimes your dishwasher starts producing a beeping sound to indicate its turning OFF. If this is the case then luckily there is nothing wrong with your dishwasher. The beeping will continue for almost a minute and after that it will automatically go away.
10. Faulty Sensors
There is a sensor present in your dishwasher which tells about the door being closed. If it becomes faulty then you might receive false alarms.
Fix Method
Contact an expert and have your faulty sensors replaced with the new ones.
How to Reset KitchenAid Dishwasher?
Performing a reset on your dishwasher is helpful when you are facing an issue that is unexplainable. So instead of jumping on to the expensive solutions, try to consider the resetting option first.
- Turn OFF the power to the main supply
- Unplug the power cord from the main plug
- Wait for 5 – 10 minutes
- Plug back the power cord into the main plug
- Turn ON your dishwasher
- Run a test cycle to check the working of your dishwasher
Check More Dishwasher:
- Bosch Dishwasher Cycles Explained
- GE Dishwasher Start Button Not Working
- Whirlpool Dishwasher Fills with Water then Stops 4 Fixation
- Bosch Dishwasher Troubleshooting e15
- GE Dishwasher Fills with Water then Stops
KitchenAid Dishwasher Keeps on Beeping for 30 Seconds
The only reason behind the 30 seconds beeping of your dishwasher is an opened door. If the door isn’t closed properly then you will hear beeping for almost 30 seconds. Close the door properly if you want the dishwasher to start a cycle.
KitchenAid Dishwasher Keeps on Beeping for 15 Times
If your KitchenAid dishwasher keeps on beeping for 15 times then it is a clear indication of an error code. To get rid of this you need to press the 3 buttons in the following sequence.
- 1-2-3
- 1-2-3
- 1-2-3
Don’t keep a gap greater than 1 second between the presses.
The End
If you want to get rid of the beeping sound then I recommend you to go through this article in detail and make sure to follow each and every instruction carefully. Share your experience with us and with your friends as well.