Sometimes I sit down and realize how much our lives have become easier just because of these latest and advanced appliances. We often take these things for granted but believe me that our survival chances will reduce drastically without these appliances. One of such appliances is a water dispenser.
The main purpose of this appliance is that it provides water to us according to our preference. Generally, there are only two options available; hot and cold water. In some advanced appliances there are three options; hot, cold and mild. Now it is up to you and your budget which one model you prefer to buy.
But you can’t expect the water dispenser to be working 24/7, I mean it will for sure undergo some issues and you will be the one to resolve them. One common problem is your Frigidaire refrigerator water dispenser working slowly. In this article I will be discussing this issue in detail so make sure to stay with me till the end.
Frigidaire Refrigerator Water Dispenser Slow – Potential Reasons and Fixes
There are some reasons due to which you will experience that your Frigidaire refrigerator is working slow. Below I have mentioned some of the reasons which are the real culprit behind this problem.
- Clogged water filters
- Blocked saddle valve
- Blocked water inlet valve
- Insufficient ice cubes
- Faulty solenoid valve
- Filtration problem
- Twisted water lines
- Insufficient power supply
- Reduced water pressure
Now that you have become aware of the reasons, it is time to have a little discussion on their fixes. Make sure to read this section thoroughly in order to avoid future inconveniences.
1. Clogged Water Filters
Water filters are one of the most important parts of a dispenser. If you are experiencing a low water rate then I would suggest you check the water filters. Sometimes there are some obstructing materials present which affect the working of the dispenser. So make sure you cover each and every possible case carefully.
Solution
Water filters are meant to work flawlessly for only 6 months. After this duration, their time limit expires and they start demanding a replacement. You can also clean the filters properly to avoid the issue but if this doesn’t work then you can get those old filters replaced.
2. Blocked Saddle Valve
Saddle valve is another important part of a water dispenser. The main usage of this component is that it controls the refrigerant gas flow. If it becomes faulty then there will be an issue controlling the refrigerant gas flow.
It mostly happens when there is a frost-buildup around this valve. To make sure that there isn’t any blockage or build-up you need to open the freezer compartment and check the cooling. If there is no issue in the cooling then it means the saddle valve is working perfectly fine.
Solution
In case of a faulty saddle valve, all you need to do is replace it with a new one.
3. Blocked Water Inlet Valve
Having a blocked water inlet valve means that the water will face difficulty to flow from the dispenser’s mouth. This is also considered as one of the culprits behind a reduced water flow.
Solution
First turn OFF the fridge for some time and then turn it back ON. Carefully notice whether the dispenser dispenses the water slowly or not. If the water is being dispensed slowly then it is obvious that the water inlet valve is blocked. This could occur due to the usage of low-quality water. Now it is up to you whether you clean the valve or have it replaced.
4. Insufficient Ice Cubes
To make a confirmation about the temperature, check the ice tray present in the fridge. If it is able to produce enough ice cubes then it means all is well. But if this is not the case then it means the ice maker’s pressure has been fluctuating.
Solution
Increase the water pressure to get rid of this problem. If you are unaware of this fix then it is better to get in touch with an expert.
5. Faulty Solenoid Valve
If you are wondering which component is responsible for regulating the water flow then it is definitely a solenoid valve. In case you are not receiving chilled water then it is due to a faulty solenoid valve.
Solution
Purchase a new solenoid water inlet valve and have it replaced with the old one.
6. Filtration Problem
Filtration problems might also affect the dispenser speed. Yes, it could be the culprit behind the problem so make sure to consider this possibility as well.
Solution
If you find any kind of blockages then make sure to clear them and configure the settings according to the requirements.
7. Twisted Water Lines
Make sure that the water lines don’t have any kind of knots or twists. Having twists and knots in the water lines might be the reason why your dispenser is working slow. Moreover, check the possible leakages in the water lines as well.
Solution
In case of blockages or leakages, make sure to replace the water lines with the new ones. If you find any knots or twists in the water lines then remove them as well.
8. Insufficient Power Supply
Sometimes your dispenser will work slowly due to power supply issues. The reason is simple, there isn’t sufficient power for your dispenser to operate properly.
Solution
Check the power supply and get it fixed.
Also Check More Refrigerator:
Whirlpool Refrigerator Water Dispenser not Working [7 Fixes]
9. Reduced Water Pressure
If you are experiencing reduced or low water pressure then it could be due to clogged filters. In case you have replaced the filters but still you see no difference then it is time to increase the water pressure up to 20 psi.
Solution
To increase the water pressure, follow the below mentioned steps.
- Get access to water and ice filtration cartridge
- Try a new cartridge for testing
- Shut off the valve if you experience no luck
- Make sure to turn the valve in counter clockwise direction
- If the pressure is still not satisfactory then check for possible blockages in the valve
Conclusion
In conclusion, it is important to have basic knowledge regarding common issues. Having such knowledge wouldn’t hurt you, in fact you will be saving a lot of money if you are able to solve these minor issues on your own.